215s
Dual Channel 15-Band Equalizer
Features
- Dual 15-band, 1/3-octave Constant Q frequency bands
- Switchable boost/cut ranges of ±6 or ±12 dB
- Front panel bypass switch
- ±12 dB input gain range
- 4-segment LED ladders for monitoring output levels
- XLR and TRS Inpts and Outputs
- Frequency Response of <10Hz to >50kHz
- Dynamic range of greater than 108dB
Spec.
- Input Connectors: 1/4" TRS, female XLR (pin 2 hot)
- Input Type: Electronically balanced/unbalanced, RF filtered
- Input Impedance: Balanced 40 kOhm, unbalanced 20 kOhm
- Max Input: >+21dBu balanced or unbalanced
- CMRR: >40dB, typically >55dB at 1kHz
- Output Connectors: 1/4" TRS, male XLR (pin 2 hot)
- Output Type: Impedance-balanced/unbalanced, RF filtered
- Output Impedance: Balanced 100 ohm, unbalanced 50 ohm
- Max Output: >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm)
- Bandwidth: 20Hz to 20kHz, +0.5/-1dB
- Frequency Response: <10Hz to >50kHz, +0.5/-3dB
- Dynamic Range: Typically >112dB
- Signal to Noise Ratio: Typically >95dB
- THD+Noise: <0.003%
- Interchannel Crosstalk: <-90db, 20Hz to 20kHz
- Bypass Switch: Bypasses the graphic equalizer section in the signal path
- Low cut Switch: Activates the 50Hz 12dB/octave Bessel high-pass filter
- Range Switch: Selects either +/- 6dB or +/- 12dB slider boost/cut range
- Operating Voltage: 100VAC-240VAC 50/60Hz
- Power Consumption: 15W
- Power Connector: IEC receptacle
- Unit Weight: 4.8 lbs.(2.2 kg)
- Shipping Weight: 6.2 lbs.(2.8kg)
- Dimensions: 1.75" (4.4cm) H x 6"(15.24cm) D x 19" (48.26cm) W