The Mike-E's Seven Circuits
1. Mic Preamplifier - Super low noise and stepped gain switching.
2. Direct Box - Unparalleled distortion, noise, and frequency response when pre-amping instruments.
3. Colored HP Filter - 80Hz High pass filter emulates the warm low frequency cut of our favorite vintage equalizers.
4. Phase Switch - Invert the audio signal 180 degrees.
5. CompSat - Offers both a musical Compressor/Limiter and a unique tape-like saturation circuit.
6. Emphasis - High-frequency emphasis system softens high frequency ‘pile-ups’ and further the creamy color of the Mike-E.
7. Mix Control - Allows the blending of the Compressed/Saturated signal with the clean unprocessed “Dry” signal.
Spec.
- Frequency Response: 3 Hz to 200 kHz on (No CompSat). CompSat is 3Hz – 150Khz. Optional Transformer output is 6Hz–80kHz.
- Signal to Noise: 130 dB signal to Noise.at 40dB gain. Maximum output is +28dBu.
- Distortion: Ranges between .0006% and 15% depending on mode and settings.
- I/O: Transformer coupled Input, Active and Transformer Outputs available. High quality audio caps used internally.
- Impedance: Input Impedance is above 600 Ohms at all frequencies, transformer coupled. Output impedance is less than 38 ohms. Instrument In Impedance is 332K Ohms.
- Attack/Decay Ranges: .9 – 70mS attack. .15 – 1 Sec.
- Power Consumption: 15 Watts Max.
- Metal Chassis: single height 1.75″ high, 10″ deep, 19″ wide.
- Shipping info: Box dimensions 22.5″ x 18.5″ x 3 1/4″.