Studio Microphone

- condenser microphone

- cardioid

- large diaphragm capsule

- PVC diaphragm

- transistor pre-amplifier

- phantom powering P48

The MT 71 S studio condenser microphone, equipped with our reliable large-diaphragm capsule, features outstanding performance, high sensitivity, and improved signal-to-noise ratio. The MT 71 S guarantees particularly clean and colourless sound reproduction. It is well-suited for instrumental and vocal soloists in radio and television broadcasting and any other kind of accurate production. The pressure gradient transducer is a dual-capacitor design that uses a single brass back-plate and two large-diameter gold-plated plastic diaphragms.

The transformerless circuit design substitutes the previous transformer for a symmetrical output stage yielding a superb transient response combined with a high RFI rejection. The circuit technology also achieves a wider dynamic range by lowering the self-noise floor and increasing the headroom for loud signals. A 10 dB attenuator has been installed to reduce the sensitivity of the microphone when placed near very loud sound sources. A sensitivity reduction for low frequencies can be utilized to suppress the proximity effect.

- Polar pattern: cardioid

- Acoustic operating principle: pressure gradient transducer

- Frequency range: 20 Hz to 20.000 Hz

- Sensitivity at 1 kHz: 13 mV/Pa ± 3 dB

- Switch position "reduced bass roll-off" at 90 Hz: -10 dB ± 1 dB

- Output impedance: 150 Ohm

- Noise level: CCIR 468-4 22 dB

                  DIN EN 60268-4 14 dB-A

- Signal-to-noise ratio: CCIR weighted 72 dB

                              A-weighted80 dB

- SPL for THD 0,5 %: 134 dB

- with 10 dB preattenuation: 144 dB

- Dynamic range: 120 dB

- Current consumption: 3 mA

- Output connector:  XLR3M

- Weight: 285 g

- Length: 217 mm

- Diameter: capsule42 mm

               preamplifier21 mm

- Surface: satin nickel, black matt